CTEC c3.05

Description

CTEC c3.05 is an aqueous cleaner to clean and degrease all metals, both ferrous and non-ferrous, in a spray pressure cleaning machine, wash tunnel or brush cleaning machine. In short, it is suitable for use in a machine with a strong agitation.

CTEC c3.05 is an excellent pretreatment for coatings.
This product can be used for wet applications and powder coating applications. CTEC c3.05 is also a good alternative for solvent cleaning and even for iron phosphates with good salt spray vapor tests.

Besides that, copper and brass are unaffected when cleaning and therefore do not change color.

Apart from all that, CTEC c3.05 is an excellent passivating product and can thus be added to a rinsing bath in a concentration of 1 % with very good corrosion resistant properties.

Product specifications

  • Low temperature: no dirt or lime is deposited. Advantage: the lifespan of the machine will be prolonged.
  • Safe for the user: CTEC c3.05 has a very high biodegradability.
  • Cost saving: through the de-emulsifying effect of this degreaser one gets a longer lifespan of the machine, less maintenance, less wastewater and a better wash quality. The low temperature ensures a lower energy and water consumption and better working conditions.
  • pH: 10,6 (alkaline degreaser).
  • Color: transparent liquid.
  • Available in drums of 28 kg or 224 kg and containers of 1050 kg.

Instructions for use

  • Fill the washing bath for 80 % with water.
  • Heat the bath at a temperature of max. 50 °C.
  • Add some CTEC c3.05 to have a working concentration between 3 to 5 % in the wash bath and 1 % in the rinsing bath.
  • Bring the bath at level by adding water.
  • Wait until the wash water is at the correct working temperature, ie 45 °C.
  • Both machine and filled bath are now ready for use.
CTEC c3.05

Need help with your cleaning problem? Contact us by e-mail or call +32 (0)14 86 16 13